KCW Air Management
Beams | Spindles | Air Management | Apparel | Kustom Parts
We carry everything you need to put together an Air Management solution for your new AirBeam. We only support the use of Nitrogen bottle setups for your ride. Once you've gone bottle fed, you'll never want to go back to a tank and compressor setup again! We find that an 80cu bottle (available at your local welding store) fits nicely in the rear package area of your bug, as well as in the trunk. On Type 3's, the bottles mount nicely over the engine lid.
Single Valve Manifold. One manifold required per air bag.
These built manifolds feature 1 inlet and 1 exhaust valve clustered with
brass fittings ready to bolt to your pan. Also includes a gauge port.
Call for pricing
Dual needle white face gauge has a spun aluminum center and
will read pressures up to 200 PSI. It has a chrome bezel and is also illuminated.
Dimensions: 2" diameter by 3 3/4" in depth. Includes 20' of 1/8" airline
and 4 fittings.
Call for pricing
Valve Fittings. This 3/8" MNPT x 1/2" tube straight fitting
is D.O.T. approved and features a nickel plated show quality finish. We
include 2 fittings in our valve manifolds.
Call for pricing
This 3/8" MNPT x 1/2" tube straight fitting is D.O.T. approved
and features a nickel plated show quality finish. We use these fittings
for the rear Shockwaves. One per Shockwave.
Call for pricing
This 1/2" MNPT x 1/2" tube elbow fitting is D.O.T. approved
and features a nickel plated show quality finish.
Call for pricing
This 1/4" MNPT x 1/2" tube elbow fitting is D.O.T. approved
and features a nickel plated show quality finish. This is the fitting I
use up front on the valves, especially if I am limited on space.
Call for pricing
This 3/8" MNPT x 3/8" FNPT x 3/8" FNPT street tee features
a nickel plated show quality finish. I use between the valves in the manifold.
Call for pricing
These are the 3/8" valves we use in all of our air suspensions.
We use 3/8" because because the inside of the 1/2" line is 3/8", the inside
of the 1/2" fittings is 3/8", so unless you increased the size of all those
items, you wouldn't be able to gain the benefits of the 1/2" valve.
Call for pricing
These are the switches we use in our systems. Single pole,
double throw. We always make custom boxes for our switches.
Call for pricing
Most regulators are 1/4" NPT, this is the fitting we put
on them.
Call for pricing
Line cost 1.27 per ft. Type 1's need approx. 20'. Sold by
the foot.
Call for pricing
Line cost .34 per ft. Used for hooking up air gauges. Sold
by the foot. Type 1's need about 20'.
Call for pricing
Perfect cuts to ensure the perfect seal. Comes with a extra
blade.
Call for pricing
