Kustom Parts
Beams | Spindles | Air Management | Apparel | Kustom Parts
We offer hard to find products at affordable prices. Our beam components are water-jet cut for a precise fit. Now you can build your own beam at home from scratch!
Double-Ply Slam Bags for your KCW AirBeam! Slam Specialties' line of
AirSprings are constructed with steel bead rings within specially-designed
dual-end closure plates. All plates are permanently bonded (instead of
clamped or crimped) to a technically advanced non-ballooning rubber bellows,
making it virtually impossible for the plates to separate from the rubber
- even unrestrained at maximum pressure. The 5 and 6 inch bags are interchangeable,
with the 6 inch bag giving more lift and greater load capacity. Same price
for RE-5 and RE-6.
Call for pricing
Type 1 Beam Bushings. Link Pin or Ball Joint. We use these self lubricating
urethane bushings as a replacement to the stock needle bushings. They
slide right into the beam tubes.
Call for pricing
Type 1 Beam Adjusters. Link Pin or Ball Joint. These adjusters weld
into your beam to make it adjustable. You will need 2 per beam.
Call for pricing
Type 1 Beam Gussets. Link Pin or Ball Joint. We weld these at the ends
of the beam tubes to give extra support to the beam. Sold as a pair. Weld
in.
Call for pricing
Type 2 Link Pin End Plates. Used in narrowing bus beams. Sold as a pair.
Call for pricing
Type 1 Beam Tubes. Brand New Beam Tubes with adjuster slit.
Call for pricing
Type 1 Beam Gussets. Link Pin or Ball Joint. We weld these at the ends
of the beam tubes to give extra support to the beam. Sold as a pair. Weld
in.
Call for pricing
Type 1 Beam Uprights. Link Pin or Ball Joint. Sold as a pair.
Call for pricing
